As your Dodge Ram rolls down the road, the front solid axle moves up and down with the road, but it also wants to move side to side. Due to the design of the Dodge front suspension, when the axle moves up and down the angle of track bar (which is designed to control the side to side position of the axle) changes. This change in angle of the track bar causes a change in the side-to-side position of the axle. Also, when you add a leveling kit to your vehicle, the OEM track bar will pull the axle to one side of the vehicle placing all of the linkage points and components on a bind where everything is under stress. This is what causes wear, damage, and deterioration to your truck’s suspension components and ultimately leads to inferior handling, poor ride-quality and early component failure. The HBS adjustable track bar solves several of the inherent design problems with the stock setup

Each track bar has 4 heavy-duty graphite impregnated polyurethane bushings for increased cushion. These bushings are self-lubricating, due to the graphite impregnation, as well as being grease-able. They also eliminate the resistance caused by the rubber bushings in the OEM (and other manufacture’s) track bars. Excellent ride quality is achieved through the improved noise and motion dampening effect of the end joint construction.The center-link arm is precision machined, 1-3/4″ round solid steel bar. The solid bar is much stronger and more durable than the thin sheet metal design of the OEM arms or tubing designs offered by other manufacturers.

The HBS adjustable track bars solve the alignment issues of your solid axle Dodge Ram. The HBS Adjustable Track bar offers up to two inches of adjustment. This makes it easy to fine-tune your suspension after the addition of modifications such as HBS leveling lift kits, as well as, addressing all of your alignment concerns.

HBS Adjustable Track bars are brilliantly designed with maximum articulation for superior handling, ride-quality and adjustability for true alignment to be obtained. However, the greatest advantage is the ease with which all of these benefits can be achieved through adjustment.

If you’ve been searching for a replacement track bar for your Dodge Ram, you have seen other OEM and after-market designs. Some manufacturers offer longer, fixed-length track bars, which can offer some increased stability, but does nothing for the alignment problems. Some manufacturers offer adjustable bars that have one-end adjustment, which do offer adjustability, but in order to adjust their length the bar need to be installed, measure hub position, uninstall, adjust, install, repeat, repeat, repeat until desired position is achieved. This process is inefficient and ultimately ineffective. The HBS Adjustable Track bars are designed to be adjusted while on the vehicle. You install the bar ONE time and adjust as needed. You can make fine-tune adjustments without the time and effort of uninstalling the bar. The ability to adjust the bar while on the truck vastly reduces the time and work of attaining the perfect axle position.
Each center-link arm is precision machined, 1-3/4″ round solid steel bar.Each bar can be easily adjusted after the bar is installed to achieve true alignment positioning.The bar is adjustable up to 2″ beyond OEM fixed-length arms to easily accommodate after-market leveling lift kits.Each bar is finished with corrosion resistant black powder coating.Each end joint is zinc coated to resist corrosion.As with all HBS manufactured products, we offer a 100% satisfaction guarantee. HBS products are guaranteed to wear for the life of your truck.
The track bar can be used on any stock Ram truck or in combination with other HBS Dodge Ram leveling/lift kit and accessories.