Specifications
| Weight | 6 lbs |
|---|---|
| upc | 639767823371 |
Ford F-150 2WD/4WD 3″ Leveling Kit 2004-2008 (Billet Aluminum)
$69.00
Hell Bent Steel is offering a Ford F-150 2WD/4WD machined billet aluminum 3″ leveling kit that lifts the front of your F-150 2WD or 4WD trucks. Designed for the 2004-2008 F-150 models.
Made in the USA!
Product Description
The Hell Bent Steel Ford F-150 leveling kit uses precision CNC machined 6061-T6 billet aluminum.
Grade 10.9 pressed-in studs and 10.9 top lock flange nuts ensure proper torque specification can be met.
Natural silver color.
Look for the “HBS” on the head of the stud to ensure you have the authentic HBS spacer!
- Fits 2004-2016 Ford F-150 2WD/4WD. Does not fit Raptor edition.
- Retains factory smooth ride.
- Ford F-150 leveling kit allows clearance for up to 33″ tires. Installation takes 1-2 hours with common shop tools. No spring compressor required.
- Lifetime warranty on all parts and a 100% satisfaction guarantee!
- Your truck will need to be aligned after installation.
- All American-made.
Please Note: The thickness of the spacer is 1.75″”. Due to the design of the independent suspension of the truck, when you extend the strut by 1.75” the angle of the strut becomes steeper allowing the truck to experience approximately 3” of lift. It is the combination of extending the strut and the change in angle that gives the 3” lift. Remember that the installation is not complete until you have had the truck realigned. This is when you will see the true 3″” lift that you are expecting.
*Our Ford F-150 leveling kits are designed and tested with 33” tires on factory wheels. However, we have many customers who are running 35” tires without any problems.
Customer Reviews
Specifications
Specifications
| Weight | 6 lbs |
|---|---|
| upc | 639767823371 |
Product Description
Product Description
The Hell Bent Steel Ford F-150 leveling kit uses precision CNC machined 6061-T6 billet aluminum.
Grade 10.9 pressed-in studs and 10.9 top lock flange nuts ensure proper torque specification can be met.
Natural silver color.
Look for the “HBS” on the head of the stud to ensure you have the authentic HBS spacer!
- Fits 2004-2016 Ford F-150 2WD/4WD. Does not fit Raptor edition.
- Retains factory smooth ride.
- Ford F-150 leveling kit allows clearance for up to 33″ tires. Installation takes 1-2 hours with common shop tools. No spring compressor required.
- Lifetime warranty on all parts and a 100% satisfaction guarantee!
- Your truck will need to be aligned after installation.
- All American-made.
Please Note: The thickness of the spacer is 1.75″”. Due to the design of the independent suspension of the truck, when you extend the strut by 1.75” the angle of the strut becomes steeper allowing the truck to experience approximately 3” of lift. It is the combination of extending the strut and the change in angle that gives the 3” lift. Remember that the installation is not complete until you have had the truck realigned. This is when you will see the true 3″” lift that you are expecting.
*Our Ford F-150 leveling kits are designed and tested with 33” tires on factory wheels. However, we have many customers who are running 35” tires without any problems.
Reviews (17)
Customer Reviews
-
First of all AMAZING product… i ordered on Tuesday with the $10 upgraded shipping and it arrived on Saturday… when the mail truck ran i had my truck torn down and ready to go… the block is solid and not hollow like many competitors products i looked at and that is really for me sold me the HBS product i recommend this product fit like a glove !
-
04 F150 supercrew cab 4×4. I purchased the 3″ kit for my truck and it is one of the best things to be added on. Sits perfectly level. You need this for your truck!
-
I put this on my 05 F150 the kit is well made and it went on very easy. I had to do a little trimming to get my 35×12.50s to fit. The truck is now a real head turner. Thanks.
-
I put the 3″ billet kit on my 2005 FX4 Screw and the front actually sits up slightly higher than the rear. I am going to put a block in the rear to level it out a bit. The kit was high quality but I discovered pretty quickly that I was going to need some help installing it and am glad I did. There is a reason they recommend a mechanic install the kit. The 3″ was pretty tight. If I had to do it again, I may go with the 2.5″ but I really wanted 35’s with adequate clearance.
-
Hey Folks! Sorry it took so long to write a review. What a great product ! The shop that did the install had never heard of HBS and since doing my truck they have done about 4 or 5 other installs! Great looks and an unbeatable price! I will look no further the next time I “need a lift” !
Keep up the great work and Thanks for making this easy!
10 STARS!!!!
-
Great Product!! Easy to Install, took approx. 1 hr. Great instructions. Had the lift for over a year now and the parts and Truck look Great!!
-
great product went on easy and has been installed for about 3 years and everything still is working perfectly. going to buy 35s for the next set of tires
-
The product quality was great but it is recomended to have done by a shop. If you do not have a pneumatic spring compressor the install is almost impossible. I was lucky that my base that i am stationed at has a good auto skills shop for the do it your self guy/girl. Get an alignment after install as well, if not you will burn out your front tires.
-
had the kit on my truck for almost a year and never had any problems at all,fairly easy to install,works great on and off road.would definitely recommend
-
Installation was fairly simple and the instructions were straight forward. The leveling kit has performed well. My truck sets level and it handles well on the road.
-
This product is great and of great quality!!! Extremely recommend it
-
Easy to install and a much better product than anyone else sells(plastic junk) I put this kit on my 04 F150 along with a 4″ block in the rear for the added lift when I have 2000lbs of salt in the bed and an 800lb plow on the front! These have held up for two years no issues and the front doesn’t drop but a 1/2″ when I raise the plow! Before it was a 2-3″ drop and since installing we put them on all of our trucks.
-
awesome products you guys have to offer.
-
Liked the ease of installment for do it your selfers. I will defenatly use he’ll bent again.
-
I had this part on my truck for several months, allowing me to push it through a lot of punishment. My truck spent a majority of its time in the woods bumping and bouncing off of things and spending time air born… I had no problems with undue stress on stock steering and suspension parts. I will be back if I purchase a newer vehicle. Though I never put larger tires on because I had just purchased new BFG all terrains I can tell 33’s would not come close to rubbing and I am confident I can fit 35’s.
2004 F150 Supercrew FX4
-
Easy Install, well made, made a big difference in the look of my truck. Had to trim a little off of my fender flares to keep the tires from rubbing. 33X12.5 Mud Grapplers on an ’06 FX4. Wheels have a little offset, so they stick out farther than the stock wheels. Can’t tell where I trimmed the fender flares though. Would buy again.
-
Love how easy instalation was and love the look more. Runnin 33″ mudders and there’s pleanty of room. Had it on for over a year now and put it to the test every weekend hunting. No problems yet.
First of all AMAZING product… i ordered on Tuesday with the $10 upgraded shipping and it arrived on Saturday… when the mail truck ran i had my truck torn down and ready to go… the block is solid and not hollow like many competitors products i looked at and that is really for me sold me the HBS product i recommend this product fit like a glove !
04 F150 supercrew cab 4×4. I purchased the 3″ kit for my truck and it is one of the best things to be added on. Sits perfectly level. You need this for your truck!
I put this on my 05 F150 the kit is well made and it went on very easy. I had to do a little trimming to get my 35×12.50s to fit. The truck is now a real head turner. Thanks.
I put the 3″ billet kit on my 2005 FX4 Screw and the front actually sits up slightly higher than the rear. I am going to put a block in the rear to level it out a bit. The kit was high quality but I discovered pretty quickly that I was going to need some help installing it and am glad I did. There is a reason they recommend a mechanic install the kit. The 3″ was pretty tight. If I had to do it again, I may go with the 2.5″ but I really wanted 35’s with adequate clearance.
Hey Folks! Sorry it took so long to write a review. What a great product ! The shop that did the install had never heard of HBS and since doing my truck they have done about 4 or 5 other installs! Great looks and an unbeatable price! I will look no further the next time I “need a lift” !
Keep up the great work and Thanks for making this easy!
10 STARS!!!!
Great Product!! Easy to Install, took approx. 1 hr. Great instructions. Had the lift for over a year now and the parts and Truck look Great!!
great product went on easy and has been installed for about 3 years and everything still is working perfectly. going to buy 35s for the next set of tires
The product quality was great but it is recomended to have done by a shop. If you do not have a pneumatic spring compressor the install is almost impossible. I was lucky that my base that i am stationed at has a good auto skills shop for the do it your self guy/girl. Get an alignment after install as well, if not you will burn out your front tires.
had the kit on my truck for almost a year and never had any problems at all,fairly easy to install,works great on and off road.would definitely recommend
Installation was fairly simple and the instructions were straight forward. The leveling kit has performed well. My truck sets level and it handles well on the road.
This product is great and of great quality!!! Extremely recommend it
Easy to install and a much better product than anyone else sells(plastic junk) I put this kit on my 04 F150 along with a 4″ block in the rear for the added lift when I have 2000lbs of salt in the bed and an 800lb plow on the front! These have held up for two years no issues and the front doesn’t drop but a 1/2″ when I raise the plow! Before it was a 2-3″ drop and since installing we put them on all of our trucks.
awesome products you guys have to offer.
Liked the ease of installment for do it your selfers. I will defenatly use he’ll bent again.
I had this part on my truck for several months, allowing me to push it through a lot of punishment. My truck spent a majority of its time in the woods bumping and bouncing off of things and spending time air born… I had no problems with undue stress on stock steering and suspension parts. I will be back if I purchase a newer vehicle. Though I never put larger tires on because I had just purchased new BFG all terrains I can tell 33’s would not come close to rubbing and I am confident I can fit 35’s.
2004 F150 Supercrew FX4
Easy Install, well made, made a big difference in the look of my truck. Had to trim a little off of my fender flares to keep the tires from rubbing. 33X12.5 Mud Grapplers on an ’06 FX4. Wheels have a little offset, so they stick out farther than the stock wheels. Can’t tell where I trimmed the fender flares though. Would buy again.
Love how easy instalation was and love the look more. Runnin 33″ mudders and there’s pleanty of room. Had it on for over a year now and put it to the test every weekend hunting. No problems yet.